100W Portable Laser Rust Removal Tool Pulse Energy Laser Cleaner Machine With CE Certificate
Technical parameters
| Item | L/N | Characteristics | Test Conditions | Min. | Typical | Max. | Unit |
| Electrical Characteristics | 1 | Power Voltage | 220 | 210 | 220 | 230 | AC |
| 2 | Maximum current loss | Pout=Pnom | 4 | 5 | 6 | A |
| 3 | Total Power | 600 | 590 | 600 | 610 | W |
| 4 | Fiber Cable | 5 | 5 | 5 | 10 | M |
| General Characteristics | 1 | Working temperature range | 0 | / | 60 | ℃ |
| 2 | Storage temperature | -10 | / | 60 | ℃ |
| 3 | Laser power | 100 | W |
| 4 | Peak power | >10KW | KW |
| 5 | Cooling method | Air Cooling | |
| 6 | Laser level | 4 Class | |
| 7 | Pulse energy | 1.5mJ | mJ |
| 8 | Laser wavelength | 1064 | nm |
| 9 | Preheat time | Reach to start operation | 0 | s |
| Achieve complete stability | 10 |
| 10 | Humidity | 10 | / | 95 | % |
| 11 | Laser machine size | L647*W440*H859 | mm |
| 12 | Weight | 70 | kg |
Product Application:
| 1. Grease, resin, gum, dust, stains, and produce residue laser removal; |
| 2. Laser Metal or glass surface coating removal, rapid paint removal; |
| 3. Cultural relics cleaning, rock cleaning, exterior cleaning of buildings. |
| 4. Laser cleaning for precision parts, oil; |
| 5. Metal surface cleaning in narrow space; |
| 6. Quick rust and various oxides laser removal cleaning; |
| 7. Laser metal surface treatment before welding, bonding, paint, rust, grease, weld oxide or residue; |
| 8. Roughening of metal surface; |
| 9. Quick laser cleaning of nuclear power unit maintenance machine; |
| 10. Laser Mold cleaning, such as tire mold, electronic mold, food mold and etc.; |
| 11. Aerospace weapons, ship manufacture or maintenance, paint and rust removal; |
Machine Advantages
Why is this process better than more traditional methods?
A key question that we are frequently asked is “How does laser cleaning work differently to the other more traditional methods?”. There are some key problems that lasers have helped to address and solve.
Firstly, other methods were contact processes, meaning they were abrasive and damaging to the materials that they were working with. Take media blasting, for example, which essentially acts like a pressure washer, but with pressurised air, to blast a material until it is clean. It gets the job done, but it often affects the material that you don’t want to damage below!
Laser cleaning, on the other hand, is non-contact and non-abrasive, and so will only irradiate the material that you want to get rid of.
You also have a great deal of control over the beam, meaning you can achieve the desired depth that you want to. Further to this, you can irradiate the whole surface layer of a material, or a much thinner layer, say the topcoat of paint, but not the primer below. Or, should you wish, you can just clean a very small section. If using another process which simply blasts the material, it is hard to enjoy such a high level of control.
One of the key benefits in the way that laser cleaning works is that not much waste is left over due to the irradiation process; the substrate is simply vaporised rather than left as waste. The majority of the waste that is left over comes as dust particles and can be easily collected and removed by the user.
Previous processes left a great deal of waste that had to be removed. Not only is this costly in terms of time efficiency, but much of this waste was hazardous as well, and users were often required to wear protective gear. This danger to worker safety has been removed by the laser.
So, the key characteristics of how the laser cleaning process works, which differentiates it from more traditional methods, are that:
It is a much safer process
It is more efficient
It offers the user a higher level of accuracy and control and
There is a greater focus on a higher quality end result
How does the process work?
While there are many different types of laser, they generally work in the same way when it comes to cleaning, although output power, pulse parameters, and wavelength can change dramatically.
The laser cleaning process works by having a laser pulse directed at the surface of a material, which blasts this layer off. The contaminants that you are trying to remove are mostly vaporised, leaving very little waste material behind. Any waste that is left is in the form of particle dust, and it’s a simple process to suction this away.
By adjusting the laser output energy, you can remove virtually anything from a surface including non-organic materials. By controlling the energy levels, various surface contaminants cam be removed (e.g. organics, mineral oxides or ceramics) with no damage to the underlying substrate.
Product Tags:
|
|
CE 100W 1.5mJ Pulse Energy Portable Laser Rust Removal Tool Images
|
